Bone Pastes
new generation visco-modulated bone pastes

orthopaedics

محصولات ترمیمی استخوان ACTIVABONE از محصولات شرکت BIOTECK کشور ایتالیا جهت جایگزینی بافت تخریب شده استخوان می باشد. به جهت فرمولاسیون جدید این محصول دارای خاصیت بالای تحریک استخوان سازی می باشد.

این محصول در وسکوزیته و فازهای مختلف ژل ، خمیر تزریقی و غالبپذیر، قطعه و پودر استخوان عرضه می شود.

محصولات

Activabone® Mouldable Paste


Composition: Demineralized bone matrix (DBM), bone powder, cortical and cancellous granules Ø ۰.۵-۱ mm, type I collagen, Exur® (low molecular weight carrier – LMW, Vitamin C).

Applications: all bone regeneration procedures, in either contained or non contained defects. Pseudarthrosis, consolidation delays, arthrodesis.

Advantages: the osteo-promoting effect of DBM and the specific rheological properties of the carrier are combined with a high osteoconductive effect given by the presence of bone granules. Excellent ease of handling (moldable), does not require hydration (shortening of surgical times), complete remodeling.

ACT-MLD010 – DBM Mouldable Paste – 1 syringe – 2.0 cc
ACT-MLD020 – DBM Mouldable Paste – 1 syringe – 1.0 cc
ACT-MLD050 – DBM Mouldable Paste – 1 syringe – 5.0 cc
ACT-MLD0100 – DBM Mouldable Paste – 1 syringe – 10.0 cc

Activabone® INJECTABLE PASTE


Composition: demineralized bone matrix (DBM), bone powder, type I collagen, Exur® (low molecular weight carrier (LMW), Vitamin C).

Applications: injectable paste osteo-promoter for filling contained bone defects or in percutaneous treatment of pseudarthrosis and consolidation delays.

Advantages: it combines the osteo-promoting effect of DBM with the specific rheological properties of the carrier, high fluidity (easy to extrude), does not require hydration (shortening of surgical times), complete remodeling.

AACT-INJ010 – DBM Injectable Paste – 1 syringe – 2.0 cc
AACT-INJ020 – DBM Injectable Paste – 1 syringe – 1.0 cc
AACT-INJ050 – DBM Injectable Paste – 1 syringe – 5.0 cc
AACT-INJ0100 – DBM Injectable Paste – 1 syringe – 10.0 cc

Activabone® CLX GEL


Composition: Bone powder, cancellous granules Ø ۰.۵-۱ mm, type I collagen, Exur® (low molecular weight carrier – LMW, Vitamin C).

Applications: carrier to improve the texture of bone grafts and cell concentrates.

Advantages: it promotes better graft management and maintenance on site.

ACT-CLX020 – Bone Powder Gel – 1 syringe – 2.0 cc
ACT-CLX050 – Bone Powder Gel – 1 syringe – 5.0 cc
ACT-CLX0100 – Bone Powder Gel – 1 syringe – 10.0 cc

Activabone® DBM GEL


Composition: Demineralized bone matrix (DBM), Exur® (low molecular weight carrier – LMW, Vitamin C).

Applications: osteo-promoter to be mixed with grafts for filling bone defects, including non contained ones. Applied on the surfaces of bone blocks and wedges to accelerate osseointegration in additive osteotomy and arthrodesis procedures.

Advantages: it combines the osteo-promoting effect of DBM with the specific rheological properties of the carrier.

ACT-GEL010 – 1 syringe – 1.0 cc
ACT-GEL020 – 1 syringe – 2.0 cc
ACT-GEL050 – 1 syringe – 5.0 cc
ACT-GEL0100 – 1 syringe – 10.0 cc

Activabone® Putty


Composition: Bone powder, cancellous granules Ø ۰.۵-۱ mm, type I collagen, Exur® (low molecular weight carrier – LMW, Vitamin C).

Applications: bone graft in containing defects (Post-extractive socket, cavities left by bone cysts).

Advantages: excellent osteoconductive effect (bone granules, bone powder), osteopromoting effect given by the 3D carrier structure and by the preserved bone collagen, can be used dry or after hydration. When hydrated it becomes moldable. Total remodeling.

ACT-PTY020 – Collagen Granules Dry Paste – 1 pc – 2.0 cc
AACT-PTY030 – Collagen Granules Dry Paste – 1 pc – 3.0 cc
AACT-PTY050 – Collagen Granules Dry Paste – 1 pc – 5.0 cc
AACT-PTY100 – Collagen Granules Dry Paste – 1 pc – 10.0 cc

Activabone® Strip


Composition: demineralized bone matrix (DBM), bone powder, Ø ۰.۵-۲ mm cancellous chips, Ø ۰.۵-۱ mm cortical chips, type I collagen, Exur® (high molecular weight carrier (HMW), Vitamin C).

Applications: posterolateral fusions and arthrodesis of small joints.Applications: posterolateral fusions and arthrodesis of small joints.

Advantages: graft ready for use, easy to mold extemporaneously in the operating room with scissors or knife. It assures excellent contact between prosthetic component and bone graft, preventing the risk of bone granules in the joint. Osteo-promoting effect given by DBM. Complete remodeling.

ACT-STR020 – Pre-Shaped DBM Strip – 1 pc – 10 x 40 x 6 mm
ACT-STR510 – Pre-Shaped DBM Strip – 1 pc – 15 x 50 x 6 mm
ACT-STR520 – Pre-Shaped DBM Strip – 1 pc – 15 x 100 x 6 mm

Activabone® Patch


Composition: demineralized bone matrix (DBM), bone powder, Ø ۰.۵-۲ mm cancellous chips, Ø ۰.۵-۱ mm cortical chips, type I collagen, Exur® (high molecular weight carrier (HMW), Vitamin C).

Applications: reconstruction of acetabular and periprosthetic defects in hip and knee arthroplasty.

Advantages: graft ready for use, easy to mold extemporaneously in the operating room with scissors or knife. It assures excellent contact between prosthetic component and bone graft, preventing the risk of bone granules in the joint. Osteo-promoting effect given by DBM. Complete remodeling.

ACT-PCH030 – Pre-Shaped DBM Patch – 1 pc – Ø۳۰ x 6 mm
ACT-PCH070 – Pre-Shaped DBM Patch – 1 pc – Ø۷۰ x 6 mm

Activabone® Crunch


Composition: Bone powder, cancellous granules Ø ۰.۵-۱ mm, type I collagen, Exur® (low molecular weight carrier – LMW, Vitamin C).

Applications: filling either contained or non contained bone defects, graft in periprosthetic defects.

Advantages: high ease of handling combined with ideal osteoconductive effect. Does not require hydration (shortening of surgical times), complete remodeling.

ACT-CRU010 – Collagen Chips Crunch – 1 syringe – 1.0 cc
ACT-CRU020 – Collagen Chips Crunch – 1 syringe – 2.0 cc
ACT-CRU050 – Collagen Chips Crunch – 1 syringe – 5.0 cc
ACT-CRU0100 – Collagen Chips Crunch – 1 syringe – 10.0 cc

فهرست